The all new Marin Alpine Trail E takes all the greatness of their longest travel, most aggressive enduro platform to make their most capable eMTB to date. With the same critically acclaimed aluminum 150mm MultiTrac chassis and progressive geometry as the conventional Alpine Trail models, but with a 250W Shimano STEPS boost to take you further, faster, and into bigger adventures than ever before.
Marin didn’t just add a battery, motor, controller to the Alpine Trail and call it a day. The Alpine Trail E was designed as a whole system, with everything from the frame to drivetrain to the individual components being individually selected to give the rider the best eMTB experience available.
ALPINE TRAIL E TECHNOLOGY
SERIES 4 ALUMINUM FRAME
Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.
MIXED WHEEL SIZES
29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.
DROPPER POST OPTIMIZED
The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.
Looking for the perfect size? Checkout our handy quick reference chart below (NOTE: The chart assumes average limb and torso proportions).Not sure about your size? Just send us your measurements using our Bike Sizing form and one of our experts will help you out!
|Rider Height||Frame Size|
|5'3" to 5'6"||S
|5'6" to 5'10"||M
|5'10" to 6'2"||L
|6'2" to 6'4"||XL
|Frame||Series 4 Alloy Frame, 150mm Multitrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
|Front Suspension||X-Fusion Trace 36 RC, 160mm Travel, 29", 110x15mm Bolt-On Axle, 44mm Offset|
|Rear Suspension||X-Fusion 02 PRO RXC, Compression and Rebound Adjustment, Custom Tune, 205x65 Trunnion Upper Mount, 25xM8 Lower Mount
|Rim||Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
|Hub Rear||Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
|Hub Front||Shimano MT-410B, 110x15mm, centerlock Disc, 32H
|Spokes||14g Black Stainless Steel|
|Tires||Front: Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible Rear: Vee Tire Co Crown Gem, 27.5x2.8”, TACKEE Compound , Tubeless Compatible
|Derailleur Rear||Shimano Deore, 10 Speed|
|Shift Lever||Shimano Deore, 10-Speed, I Spec EV
|Crankset||Shimano EM600, 160mm Length|
|Motor||Shimano EP6, 250 W, 85Nm|
|Chain||KMC X-10E, Silver|
|Cassette||Shimano Deore 10-speed 11-46T|
|Brakes Front||Shimano MT420, 4-Piston Hydraulic Disc Brake, Metallic Pads, 203mm Rotor|
|Brakes Rear||Shimano MT420, 4-Piston Hydraulic Disc Brake, Metallic Pads, 203mm Rotor w/ Speed Sensor|
|Brake Levers||Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible|
|Handlebar||Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
|Stem||Marin 3D Forged Alloy, 35mm|
|Grips||Marin Grizzly Lock On|
|Headset||FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|Seatpost||TranzX, YSP18JL, 1x Remote, Size S 150mm Travel, All Other Sizes 170mm Travel, 30.9mm
|Saddle||Marin E-MTB Saddle|
|Pedals||Marin MTB Plastic|
||BT-8035L, Internal 504Wh|
|Switch||SW-EN600L Left Hand Switch for Assist Mode Change
|Extras||Shimano CS-EM800 Chain Guide
|Extras||Shimano Battery Charger EC-E6002
Specifications are subject to change without notice.
|Head Tube Angle||63||63||63||63|
|Head Tube Length (mm)||100||110
|Seat Tube Angle||78
|Seat Tube Length (mm)||390||400||425||430
|Top Tube Effective (mm)||575
|Fork Offset (mm)||-
|Stand Over Height||681.6
|Chain Stay (mm)||435
|Seat Post Diameter||30.9||30.9||30.9||30.9|
|Handlebar Width (mm)||-
|Stem Length (mm)||35||35||35||35|
We're an authorized Marin dealer, which means that every bike we sell is backed by Marin's warranty, including a one-year complete bike warranty and a five-year frame warranty. For full details, click here.